Irrespective of how you’re using cell and internet service, it’s fair to say that the common interference you deal with is quite an annoyance. As such, you may try to find different ways of solving this problem on your own, but none of those do much. The three signal booster according to UCtel, however, is another story altogether and this is what makes it so highly sought after.
The importance of receiving uninterrupted cell and internet signals can often have some serious ramifications. So, as you read on, you’ll understand these as well as what the three signal boosters solution is and how it works.
Table of Contents
What causes bad signals?
As stated in the introduction, signal interference is common and inevitable. Even places that have continuously decent reception will experience faulty signals at some point. This occurs due to several things which are as follows:
- a huge distance from the closest operator’s tower
- dense material built into thick buildings
- a location
- being underground like a basement
- interference from other radio frequencies
These problems can be solved by having a three-signal booster fitted into your building. That said, boosters won’t solve every issue as they’re limited in their capabilities. This means that if the source of the signal is faulty, nothing can be done to improve it.
Three’s signal boosters
A signal booster is an assembly of different components that form an apparatus that’s sole purpose is to improve the signal within a designated place. Three has its version, which has caught fire because of the quality coverage it possesses.
To properly understand how the cellular booster works, you have to know each component and what it does. The following information shows this as well as how each component fits into the installation process:
Looking at the antennas
Boosters are composed of two antennas, a high-frequency cable, and an amplifier, which you’ll get to as you read on. One of the two antennas is fixed externally in a place that easily receives a signal from the towers. Usually, this place is outside on the roof or just the highest point on the wall.
The other antenna is placed inside and receives improved signals transmitted from the amplifier and is placed at the place where most activity occurs. Based on the layout of the place, one interior antenna won’t cover it, in which case multiple antennas are required.
Checking the amplifier
The amplifier is really where the magic happens, as it happens. Its job is to increase the frequency of the signals by a set amount as well as to cancel out any rogue radio frequencies and other things that can interfere.
A high-frequency cable connects the external antenna to the amplifier, which then amplifies the signal and sends it to the interior cable. This competent is always put in a safe spot inside the building, usually right where it’s needed. This is usually the case for difficult places such as parking lots where the signal often doesn’t reach.
Who fits the system in?
One thing you’ll be aware of once the booster is installed is that it is incredibly versatile. This presents itself in the number of setups that can be used, which include the following:
- offices and commercial buildings
- underground parking lots and basements
- retail complexes
It comes with a litany of features. Among the most notable is the ability to limit the number of users at a time as well as the capability to do the same for energy output from the amplifier. All these things are certainly in your hands, which is why consulting trusted and reputable experts is a wise thing to do before you acquire a booster of your own.
These experts are usually going to be the ones to fix these systems, anyway, so it’s a good idea to give them a layout of the spot you’re prepping. After a thorough assessment, they’ll give you a proper idea of what is needed, after which you can give them the go-ahead.
Why use them?
The obvious answer to this question is that improved cell and internet signals make overall conditions better, be they business or recreational. The business end in particular sees a lot of upside, because of the communication aspect that’s needed for success.
This is applicable in areas concerning both internal and external communication. If you’re in a commercial building that needs an intercom, for example, good communication will be a plus.
Some things are more important than others and this includes the issue of health and emergencies. Accidents can happen anywhere and the worst place to be in is one that lacks a good signal that’ll allow you to call for help. This often happens in parking lots and due to signal boosters, help can be found.
Drawbacks to using signal boosters are few and far between. However, searching for them can be quite a hassle as you’ll need to fit them into your setup perfectly. If not, you’ll likely experience some functionality issues. This often means having to spend extra, especially on multiple interior antennas if the space is too large to accommodate only one.
As stated earlier, they’re unable to control how good the signal being received is. This also applies to terrible locations, which is why consultations with experts are important to ensure your money isn’t wasted on something that won’t work.
From the above, it’s clear to understand that adding booster technology to Three’s excellent coverage has made it even more popular than it has been. The three-signal booster solution is also incredibly versatile, making it adjustable in not just installation, but usage. With better overall communication, any user’s activities regarding any field are made easier.
That said, you should be aware of the limits boosters have to be prepared for situations in which issues arise. That’s why a reputable dealer should be called upon to see what it is you need as well as give advice on how to maintain it in the future.